JS500 twin unit
The JS500 twin-shaft concrete mixing plant uses two JS series twin-shaft forced mixers, achieving double production capacity through parallel design and meeting the needs of large-scale production in medium and small-sized projects.
Product Classification:
Compulsory concrete mixer
Keywords:
Construction equipment
JS500 twin unit Details
Product Introduction
The Kexin JS500 forced-type mixer is a relatively advanced and ideal model currently on the market. It boasts high automation, excellent mixing quality, high efficiency, low energy consumption, low noise, easy operation, fast discharge speed, long service life of liners and blades, and convenient maintenance. It is suitable for mixing plastic, dry-hard, lightweight aggregate concrete, and various mortars and slurries. This machine uses motorized discharge and can be used with dump trucks, making it an ideal machine for various types of construction sites.
Product Features
The JS500 concrete mixer is a new type of forced concrete mixer jointly developed by our company's scientific researchers and many experts. It has the following significant features:
1. The drum and body are fixed, and the mixing shaft does not bear the pressure of the material and the drum's own weight. This extends the service life of the mixing shaft.
2. It uses pneumatic door discharge, avoiding the drawback of residual raw materials in rotating drum discharge.
3. Discharge is quick and clean.
4. Maintenance is convenient, time-saving, and labor-saving.
5. High production efficiency. This machine can mix plastic, dry-hard, and flowable concrete, as well as lightweight aggregates and mortar. It is widely used in construction enterprises such as expressways, bridges, power stations, dam construction, and large and medium-sized prefabricated plants.
6. Strong overload capacity, low noise, and reliable operation
7. The outer spiral ribbon pushes the material to form a boiling material flow, and the inner scraper performs radial shearing, resulting in intense and thorough mixing.
8. It uses advanced hydraulic drive equipment, avoiding the problem of the mixer being unable to discharge due to insufficient air pressure during pneumatic door discharge.
9. Three-dimensional boiling intense mixing effectively avoids the "shaft binding" problem common in traditional mixers.
Product Parameters
Item | Model: JS500 | |
Discharge Capacity (L) | 500 | |
Charging Capacity (L) | 800 | |
Theoretical Production Rate (m³/h) | ≥25 | |
Maximum Aggregate Size (Pebble/Crushed Stone) mm | ≤40/50 | |
Overall Dimensions | Transportation Status | 2900×2200×2680 |
Working Status | 4461×3050×4180 | |
Mixing Blades | Speed (r/min) | 31 |
Quantity | 2×7 | |
Mixing Motor | Model | Y180M-4 |
Power (Kw) | 18.5 | |
Hoisting Motor | Model | YEZ132S-4 |
Power (Kw) | 5.5 | |
Precautions During Discharge
1. Operators of concrete mixers should prevent their bodies from being struck.
2. Securely hold the packaging of added materials (such as woven bags, paper bags, and barrels) to prevent them from falling into the hopper or wrapping around the mixer. In case of such an accident, immediately stop the machine and remove the obstruction. Strictly prohibit pulling outwards while the machine is running to prevent accidental personal injury.
3. Operators are not allowed to leave the mixer while the mixing shaft is rising or falling to prevent accidents caused by failure of the lifting/lowering switch.
4. During operation, the mixing shaft should not be raised to an excessively high position to prevent paint and oil from being stirred out.
5. Personnel operating the concrete mixer should avoid frequent starting of the main unit within a short period.
6. During mixing operation, promptly clean the paint and oil on the mixing shaft (stop the machine for this). This prevents sleeves from getting caught in the mixing shaft, causing safety accidents.
7. The mixing drum should be connected to an electrostatic grounding device, and the grounding should be good.
Product Details
1. Aggregate Batching System
The JS500 concrete batching plant uses a PLD800 concrete batching machine, which consists of a feeding mechanism, a weighing system, and an electrical control system. Its features include a "品"-shaped arrangement of the feeding mechanism, belt conveyor feeding, and lever plus single-sensor weighing for accurate measurement.
2. 500 Mixing System
The plant's mixing host uses a JS500 twin-shaft forced mixer, capable of mixing flowable, dry-hard, lightweight aggregate concrete, and various types of mortar. This mixer features a reasonable structure, good mixing quality, short mixing time, energy efficiency, and low noise.
3. Electrical System
Main features of the electrical system: stable operation, reliable performance; core electrical components use products from Schneider Electric and other manufacturers, ensuring quality.
4. Aggregate Conveying System
The plant's aggregate conveying system uses a bucket elevator feeding method. Its main advantage is its small footprint, saving land resources.
Related Products
The HZS25 concrete mixing plant is a simple, small, automatic-feeding concrete mixing plant, consisting of a JS500 forced mixer, feeding system, batching system, electrical control system, and steel structure; it is a semi-automatic concrete mixer.
Details
The HZS35 simple mixing station uses a fully automated configuration, consisting of a material conveyor belt, mixing host, and batching machine.
Details
The HZS35 simple mixing station uses a fully automated configuration, consisting of a material conveyor belt, mixing host, and batching machine.
Details
HZS35 station (horizontal cement silo)
The HZS35 simple mixing station uses a fully automated configuration, consisting of a material conveyor belt, mixing host, and batching machine.
Details
Product Consultation
Zhang Jiusheng's Business Card - Zhengzhou Kexin Construction Machinery Co., Ltd.
Mobile:+86 155 1759 8830
Telephone:+86 371-6468 5678 / +86 371-6468 5588
Fax: +86 371-6468 5588
Email: zjs@zzkexin.com
Website: https://en.zzkexin.com/